Eurotruss | HDX45

Eurotruss | HDX45

HDX45 is a square truss based on the ‘Eurotruss original’ HD44 Truss, are you having issues with placing loads like LED screens, lighting fixtures, or decor on a central position of the truss? Then look no further. HDX45 is the best solution!

The HDX45 truss has a 50×4 mm main tube which ensures strength and maximum durability, the truss is designed for high-frequency usage or fixed installations. It is available in standard lengths up to 4 meters. An additional 50×4 mm tube is placed in the center of the truss at the bottom and allows rigging bars of LED screens to be mounted directly under it.

This center chord has a slightly higher trim height than other LED Screen Truss solutions, while the use of narrow aluminum plates instead of tubes allows for more space for the positioning of clamps or slings.

HDX45 can be combined with HD44 truss lengths because it has the same geometry size*. The truss is equipped with the CS1 coupling system.

Powder coating finish in various colors is available upon request.

*Please consider deadweights of the heavier system in combination with the load ability of the HD44.

• Height: 400 mm (15.75 in)
• Width: 400 mm (15.75 in)
• Main Tube: 50 x 4 mm (1.97 x 0.16 in)
• Braces: 25 x 2 mm (0.98 x 0.08 in)
• Weight: ~11 kg/m (~7.4 lbs/ft)
• Pin Position: Diagonal
• Material: EN AW-6082 T6
• Connection: CS1-CON