Yamaha | RUio16FLX-D

Yamaha | RUio16FLX-D

The Dante-compatible RUio16FLX-D provides 16 channels of either analog input, analog output, or AES/EBU output so you can easily configure systems for use with Yamaha digital mixers and processors. Source channels can be selected in groups of two, and flexible support is provided for I/O expansion.

• I/O: 16 channels of flexible I/O with Euroblock connectors (analog input, analog output, or AES/EBU output)
• Dante: 16 receive channels, 16 transmit channels
• Local display and control of gain and phantom power settings
• Power consumption: 45 W
• Dimensions (W x H x D): 480 × 44 × 369 mm (18.9” x 1.7” x 14.5”)
• Net weight: 4.0 kg (8.8 lb)

Analog Input: 16 (Flexible I/O)
Analog Output: 16 (Flexible I/O)
AES/EBU Output: 16 (Flexible I/O)
Sampling frequency rate: External: 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz ±200 ppm; +4.1667%, +0.1%, −0.1%, −4.0% ±200 ppm
Signal delay: Less than 1.7 ms @ Fs=96 kHz, 2.0 ms @ Fs=48 kHz
Total harmonic distortion: Less than 0.05% +4 dBu @ 20 Hz - 20 kHz, GAIN: 0 dB into 10k Ω; Less than 0.15% +4 dBu @ 20 Hz - 20 kHz, GAIN: +64 dB into 10k Ω
Frequency response: +0.5, −1.5 dB, 20 Hz - 20 kHz, refer to +4 dBu output @ 1 kHz, input to output, Fs=48 kHz or 96 kHz
Dynamic range: 114 dB typ., DA Converter; 109 dB typ., Input to Output, GAIN: 0 dB
Equivalent input noise: −128 dBu typ., GAIN: +64 dB
Residual output noise: −88 dBu, main stereo channel off
Crosstalk: INPUT: −100 dB, adjacent inputs, GAIN: 0 dB, @ 1 kHz; OUTPUT: −100 dB, input to output, @ 1 kHz
Power requirements: 100–240 V, 50 Hz/60 Hz
Power consumption: 45 W
Dimensions: 480 mm (18.9”) W / 44 mm (1.7”) H / 369 mm (14.5”) D
Net weight: 4.0 kg (8.8 lb)
Accessories: Read This First × 1; AC Power cord × 1; Euro block plug mini 3pin × 16; Cable tie × 16
Operating temperature range: 0 to 40°C
Storage temperature range: −20 to 60°C
Fan speed: LOW: NC=20 / HIGH: NC=25
Analog Input: INPUT 1–16, +64 dB / 0 dB gain, 10 kΩ, 50–600 Ω Mics / 600 Ω Lines, −80 dBu to +24 dBu, Euroblock (3.5 mm pitch), Balanced
Analog Output: OUTPUT 1–16, 75 Ω, 10 kΩ Lines, +4 dBu (1.23 V) nominal, +24 dBu (12.3 V) max. before clip, Euroblock (3.5 mm pitch), Balanced
Dante: Dante PRIMARY/SECONDARY, 24-bit / 32-bit, 1000BASE-T, 16ch TX / RX, etherCON Cat5e
AES/EBU: AES/EBU Professional use, 24-bit, RS-422, 16ch output, Euroblock (3.5 mm pitch), Balanced
Network: IEEE802.3, 1000BASE-T/100BASE-TX, RJ-45