Yamaha | RUio1608SB-D

Yamaha | RUio1608SB-D

Yamaha's guiding principle in live sound design has always been to capture transparent sound from the stage and only then to color it with successive layers of audio processing. The RUio1608SB-D remains true to this principle, and gives audio engineers an ideal sonic foundation to build upon to ensure their sound is delivered and received exactly as intended using the versatile tools of our mixers and processors.

With 16 inputs and 8 outputs in a Dante-compatible I/O stagebox, the RUio1608SB-D is compact enough to be placed directly on the stage without getting in the way. Sleek design, the highly flexible connectivity afforded by Dante, and the ease with which it can be controlled from a Yamaha digital mixer make this the perfect stagebox for live music performances, houses of worship, corporate events, and practically any other application you can think of.

 

Analog Inputs: 16
Analog Outputs: 8
Sampling Frequency Rate: 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz ±200 ppm, +4.1667%, +0.1%, -0.1%, -4.0% ±200 ppm
Signal Delay: Less than 1.7 ms @96 kHz, 2.0 ms @48 kHz (RUio1608SB-D input to output connected with DM5 via Dante, Dante Receive Latency set to 0.25 ms)
Total Harmonic Distortion: Less than 0.05% (+4 dBu, 20 Hz - 20 kHz, Gain 0 dB into 10 kΩ), Less than 0.15% (+4 dBu, 20 Hz - 20 kHz, Gain +64 dB into 10 kΩ)
Frequency Response: +0.5 / -1.5 dB, 20 Hz - 20 kHz, referenced to +4 dBu output @1 kHz, input to output, 48 kHz or 96 kHz
Dynamic Range: 114 dB typ. (DA Converter), 109 dB typ. (Input to Output, Gain 0 dB)
Equivalent Input Noise: -128 dBu typ., Gain +64 dB
Residual Output Noise: -88 dBu, main stereo channel off
Crosstalk: Input: -100 dB, adjacent inputs, Gain 0 dB @1 kHz; Output: -100 dB, input to output @1 kHz
Power Requirements: 100–240 V, 50/60 Hz
Power Consumption: 40 W
Dimensions W: 374 mm (14.7")
Dimensions H: 170 mm (6.7")
Dimensions D: 145 mm (5.7")
Net Weight: 3.5 kg (7.7 lb)
Accessories: Read This First ×1, AC power cord ×1
Operating Temperature: 0 °C to 40 °C
Storage Temperature: -20 °C to 60 °C
Noise Level: Fan speed LOW: NC=20, HIGH: NC=25 (measured at 1 m from front of unit)
Analog Input Gain: +64 dB to 0 dB
Analog Input Impedance: 10 kΩ
Compatible Sources: 50–600 Ω microphones, 600 Ω line sources
Input Sensitivity (+64 dB): -80 dBu (0.078 mV) nominal, -60 dBu (0.775 mV) maximum before clipping, -40 dBu (7.75 mV) maximum level
Input Sensitivity (0 dB): -16 dBu (123 mV) nominal, +4 dBu (1.23 V) maximum before clipping, +24 dBu (12.3 V) maximum level
Input Connectors: XLR 3-pin female, balanced (1=GND, 2=HOT, 3=COLD)
Phantom Power: +48 V DC, individually switchable per input
Output Impedance: 75 Ω
Output Load Impedance: 10 kΩ or higher
Nominal Output Level: +4 dBu (1.23 V)
Maximum Output Level: +24 dBu (12.3 V)
Output Connectors: XLR 3-pin male, balanced (1=GND, 2=HOT, 3=COLD)
Dante I/O: 16 channels TX / 8 channels RX
Dante Format: Dante, 24-bit / 32-bit, 1000BASE-T
Dante Connectors: etherCON (Cat5e or higher recommended)
Network: IEEE802.3, 1000BASE-T / 100BASE-TX
Network Connector: RJ-45 (Cat5e or higher recommended)