Martin | Ext- Projection 500, Medium, EU, White

Martin - Ext- Projection 500, Medium, EU, White

The Exterior™ Projection 500 is a powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs. The fixture can be used for bright and dynamic logo projection as well as precision framing.

Using advanced LED technology, it offers outstanding energy efficiency, compact size and unlimited creative possibilities.

Features

Up to 6100 lumens output with 4 beam angles variants from narrow to wide
Powerful close-range and long-range projection
Flat-field, high-contrast image projection based on high-power LED engine
4 layers of versatile dynamic effects (colors, gobo projection, gobo animation, prisms/frost)
Crisp image projection
Rugged IP66-rated housing
Minimal maintenance – low total cost of ownership

Specificaties

Physical

Length: 415 mm (16.4 in.)
Width: 293 mm (11.6 in.)
Height: 444 mm (17.5 in.)
Weight: 17.5 kg (38.6 lbs.)
All figures include mounting yoke

Dynamic Effects

Color wheel: 8 interchangeable colors + open
Gobo wheel: 6 rotating gobos plus open, indexing, variable rotation
Gobo animation: Variable speed linear animation effect
Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing
Frost (wash effect): Motorized variable
Dimming: Electronic, constantly variable 0-100%, 16-bit control
Shutter: Strobe and pulse effects, instant open and blackout
Focus: Motorized, variable 3 m (9.8 ft.) to infinity

Control and Programming

Stand-alone control: Up to 20 scenes with global fade/hold times
Control options: DMX, RDM, standalone
Configuration, addressing and status: Onboard control panel with OLED display
8-bit control: color/gobo selection, prism, frost, animation
16-bit control: Gobo indexing and rotation, focus and intensity
DMX channels: 13
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20

Optics

Light source: 230 W white light LED engine
CRI (Color Rendering Index): 72
Color temperature: 8300 K
LED lifetime: 20,000 hours (to >70% luminous output)*
LED manufacturer: Prolight Opto
Binning: Tight color and flux binning
*Figure obtained under manufacturer's test conditions

Photometric Data

Narrow: Cut-off angle: 12°, Total output: 5000 lumens, Center peak: 203,000 cd
Medium: Cut-off angle: 22°, Total output: 6100 lumens, Center peak: 77,000 cd
Wide: Cut-off angle: 37°, Total output: 5700 lumens, Center peak: 28,000 cd
Very Wide: Cut-off angle: 50°, Total output: 3400 lumens, Center peak: 11,000 cd
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction

Housing: Cast aluminum
Finish: Hard anodized, metallic grey lacquered
Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
Ingress protection: IP66
Impact resistance: IK08 (with control panel display cover plate installed)
Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64)
EPA (Effective Projected Area): 0.15 m²
RoHS compliant

Gobos

Suitable material: Borosilicate glass, coatings heat-resistant to 450°C (842°F)
Alternative material: Aluminum 1060, paint on front lens side, 450°C (842°F)
Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
Maximum image diameter: 23 mm (0.91 in.)
Glass gobo thickness, min.: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
Glass gobo thickness, max.: 3.0 mm ±0.3 mm (0.12 ±0.012 in.)
Aluminum gobo thickness: 0.5 mm ± 0.02 mm (0.020 ± 0.001 in.)
HT paint

Installation

Mounting: Adjustable yoke
Location: Suitable for wet locations. Do not immerse in water.
Orientation: Any (sides must be kept vertical)
Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Connections

Power cable entry: IP68 cable gland
Power connection: 1.8 m (5.9 ft.) cable tail with bare ends
Data cable entry: IP68 cable gland
Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

Electrical

AC power: 100-240/277 V nominal, 50/60 Hz
Power Supply: Auto-ranging electronic switch-mode
Typical half-cycle RMS inrush current: 8.4 A
Idle power (zero intensity, no effects): 32 W, 0.3 A
Surge protection: 4 KV

Typical Power and Current

110 V, 60 Hz: 320 W, 2.9 A, PF 0.977
230 V, 50 Hz: 310 W, 1.4 A, PF 0.971
277 V, 60 Hz: 305 W, 1.2 A, PF 0.950
Figures are typical, not maximum. Allow for a deviation of ±10%

Thermal

Cooling: Convection, internal forced air
Total heat dissipation: 1100 BTU/hr.
Max surface temp: 85°C (185°F)
Max ambient temp (Ta max.): 45°C (113°F)*
Min ambient temp (Ta min.): -30°C (-22°F)**
*Output regulated above 45°C to prevent overheating
**Integrated heating element for cold start

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 20 lm/W
LWR: 349 lm/kg (158 lm/lb)

Approvals

Global CB Certification: IEC 60598-2-5 (IEC 60598-1)
EU safety: EN 60598-2-1, EN 60598-2-5, EN 62471, EN 62493
EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2/3/4, EN 61547
US safety: ANSI/UL 1598
US EMC: CFR 47 Part 15 Class A
Canadian safety: CSA C22.2 No 250.0
Australia/NZ: RCM
India: BIS

Related Items