Shure - RPM181/BI
The Shure RPM181/BI is a bi-directional condenser capsule for the Shure Beta 181 microphone. The Beta 181/BI capsule is ideal for mono drum overheads, and dual instrument sound source applications.
The Shure Beta 181 is a multipurpose instrument microphone and can be used on a wide variety of applications including guitars, bass and drums (overheads and snares). It has a small diaphragm design that provides superior audio with textbook polar responses in a form factor compact enough to get close to the source in the tightest conditions.
There are four different capsules available for the Beta 181 microphone: Cardioid (RPM181/C), Supercardioid (RPM181/S), Bi-directional (RPM181/BI), Omni-directional (RPM181/O). This makes the Beta 181 an extremely versatile and cost-effective mic that allows the user to interchange capsules according to the application.
- Cartridge Type: Electret Condenser
- Polar Pattern: Bidirectional
- Frequency Response: 20 to 20,000 Hz
- Output Impedance: 110 Ω
- Sensitivity (open circuit voltage, @ 1 kHz, typical: -51.0 dBV/Pa (2.6 mV)
- Maximum SPL (1 kHz at 1% THD) 2500 Ω load: 156.0 dB SPL 1000 Ω load: 153.5 dB SPL dB SPL
- Signal-to-Noise Ratio: 71.0 dB
- Dynamic Range: 2500 Ω load: 133.0 dB dB 1000 Ω load: 130.5 dB
- Clipping Level @ 1 kHz, 1% THD: 2500 Ω load: 10.5 dBV1000 Ω load: 7.5 dBV
- Self Noise (equivalent SPL,A-weighted, typical): 22.5 dB SPL-A
- Common Mode Rejection (20 to 20,000 kHz): ±55 dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Power Requirements 11-52 V DC phantom power (IEC-61938): 2.4 mA, maximum
- Capsule width: 1.36" (34.54mm)
| Conditie | Nieuw |
|---|---|
| Merk | Shure |
