Yamaha - EMX7
Get Serious About Your Sound
The new EMX7 and EMX5 were designed specifically for musicians, performers, or public speakers who put a premium on sound quality and convenient operation, and are ready to take their sound reinforcement to the next level. Despite their compact construction, only speakers and a microphone are required to configure a fully functioning, extremely portable, and reliable sound system with all the tools you need to mix, process, and deliver your audio just the way you want, anywhere you want.
Box-type robust and portable powered mixer featuring high efficiency power amplifier of 710W and mixer with comprehensive effects, Flex 9 Graphic Equalizer, speaker preset and built-in feedback suppressor.
- 2x 710W [4Ω], 2x 500W [8Ω] (1kHz THD+N less than 10% CEA2006)
- 2x 600W [4Ω], 2x 400W [8Ω] (1kHz THD+N less than 1% CEA2006)
- Powerful & High Efficiency Class-D Amplifier
- 12 Line Inputs (8 mono + 4 stereo)
- High-Z input (channel 4) to connect guitars or basses directly
- Flex 9 Graphic Equalizer
- Onboard Feedback Suppressor
- Comprehensive, professional 24 different effects
- Yamaha Speaker presets
- Metal chassis for extended operation and robustness
- Large handles for extreme portability and protection
- Universal power supply eliminates concern on power fluctuations
- Optional rack-mount kit available
Specifications
- OUTPUT POWER 1 kHz THD+N < 10%: 710 W + 710 W (4 Ω)
- (CEA2006): 500 W + 500 W (8 Ω)
- 1 kHz THD+N < 1%: 600 W + 600 W (4 Ω)
- (CEA2006): 400 W + 400 W (8 Ω)
- INPUT CHANNELS LINE INPUT: 12 (8 MONO + 4 STEREO)
- MIC INPUT: 8
- MONO INPUT (MIC/LINE): 4 (CH1-4)
- MONO/STEREO INPUT (MIC/LINE): 4 (CH5-12)
- STEREO INPUT (LINE): 4
- OUTPUT CHANNELS SPEAKERS: 2 [A, B]
- STEREO OUT: [L, R]
- AUX SEND: 2
- REC OUT: [L, R]
- BUS STEREO: 1
- AUX: 2 (incl. FX)
- EFFECT: 0
- USB AUDIO - USB IN/OUT: No (Used only for performing maintenance)
- PHANTOM POWER: +48 V
- POWER REQUIREMENTS: 100 - 240 V, 50 Hz/60 Hz
- POWER SUPPLY TYPE: Internal Universal Power Supply
- POWER CONSUMPTION: 45 W (Idle) / 250 W (1/8 Power)
- DIMENSIONS W x D x H: 465 mm x 325 mm x 308 mm (18.3" x 12.8" x 12.1")
- NET WEIGHT: 9.5 kg (20.9 lbs)
- INCLUDED ACCESSORIES: AC Power Code (2.5 m), Owner’s manual, Technical Specifications
- OPTIONAL ACCESSORIES: RK-EMX7 Rackmount kit, FC5 Foot Switch
- OPERATING TEMPERATURE: 0 to 40˚C
Featured Functions
- D-PRE MIC PREAMP: No
- FEEDBACK SURPPRESSOR: Yes
- 1-KNOB COMP: Yes
- SPX DIGITAL EFFECTS: Yes (24 programs. REV HALL1 / REV HALL 2 / REV ROOM 1 / REV ROOM 2 / REV STAGE 1 / REV STAGE 2 / REV PLATE / DRUM AMB / EARLY REF / GATE REV / SINGLE DLY / DELAY / VOCAL ECHO / KARAOKE / PHASER / FLANGER / CHORUS 1 / CHORUS 2 / SYMPHONIC / TREMOLO / AUTO WAH / RADIO VOICE / DISTORTION / PITCH CHANGE)
Electrical Specifications
- TOTAL HARMONIC Input to SPEAKERS: 0.1% @ 10 W (40 Hz - 20 kHz)
- DISTORTION: 0.04% @ 65 W (1 kHz)
- Input to STEREO OUT,: 0.02% @ +14 dBu (20 Hz - 20 kHz)
- AUX1 SEND, AUX2 SEND: 0.007% @ +20 dBu (1 kHz)
- FREQUENCY RESPONSE Input to SPEAKERS: +1 dB/-3 dB (40Hz - 20kHz), refer to the nominal output level @ 1 kHz
- Input to STEREO OUT,: +0.5 dB/-1 dB (20Hz - 20kHz), refer to the nominal output level @ 1 kHz
- AUX1 SEND, AUX2 SEND:
- HUM & NOISE LEVEL Equivalent input noise: -117 dBu (20Hz to 20 kHz)
- Residual output noise /Input to SPEAKERS: -66 dBu (40 Hz to 20 kHz, STEREO MASTER LEVEL: min)
- Residual output noise /Input to STEREO OUT,AUX1 SEND, AUX2 SEND: -80 dBu (20 Hz to 20 kHz, STEREO MASTER LEVEL: min)
- CROSSTALK @ 1 kHz: -85 dB
- INPUT CHANNEL PAD: 30 dB (CH1-4)
- FUNCTION HI-Z: Supported (CH4)
- HPH: 80 Hz, -12 dB/oct (CH1-3)
- COMP: 1 knob COMP (CH1-4)
- INPUT CHANNEL EQ High: ±15 dB (10 kHz shelving)
- Mid: ±15 dB (2.5 kHz peaking)
- Low: ±15 dB (100 Hz shelving)
- LED LEVEL METER Pre Monitor Level: 2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB)
- PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping level