Martin - Exterior Wash 310, 10° EU, Alu Martin - Exterior Wash 310, 10° EU, Alu Martin - Exterior Wash 310, 10° EU, Alu Martin - Exterior Wash 310, 10° EU, Alu Martin - Exterior Wash 310, 10° EU, Alu Martin - Exterior Wash 310, 10° EU, Alu
Martin - Exterior Wash 310, 10° EU, Alu

Martin - Exterior Wash 310, 10° EU, Alu

List price:
€3,701.77 Excl. Tax
Your price:
€3,442.65 Excl. Tax
Your discount: 7%
Availability:
In stock
Art. code
MP-18.0508

Martin - Exterior Wash 310, 10° EU, Alu

Exterior Wash™ 310 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 310 is designed for superior color mixing applications and is based on quad-color premixed LEDs.

  • Uniform color mixing with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display

Specifications:

Physical

  • Length: 270 mm (10.7 in.)
  • Width: 334 mm (13.2 in.)
  • Height: 382 mm (15.1 in.)
  • Weight: 13.0 kg (28.7 lbs.)

Dynamic Effects

  • Color mixing: RGBW
  • Intensity: 0 - 100%

Control and Programming

  • Control systems: DMX, RDM
  • Setting, addressing, standalone programming: Control panel with OLED display
  • DMX channels: 3-5 depending on DMX mode
  • Receiver: RS-485
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20
  • Firmware update: Serial upload via DMX link

Optics

  • Light source: 19 x RGBW quad-color LEDs
  • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
  • LED manufacturer: Cree
  • Beam Angle Options:
  • No diffuser: 10.5°
  • Narrow diffuser: 14°
  • Medium diffuser: 24°
  • Wide diffuser: 43°
  • Very wide diffuser: 63°
  • Asymmetric diffuser: 61° x 16°

*Figure obtained under manufacturer's test condition

Photometric Data

  • Total luminous output: 4900 lumens

Construction

  • Housing: Cast aluminum
  • Color: Light grey (white, black or other colors available on request)
  • Ingress protection rating: IP66
  • Surface treatment: Anodized and electrostatic powder-coated
  • Effective Projected Area (EPA): 0.1 m² including snoot
  • Impact resistance: IK08 (with control panel display cover plate installed)
  • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
  • RoHS compliant

Installation

  • Mounting: Adjustable yoke
  • Orientation: Any
  • Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)

Connections

  • Power connection: 1.8 m (5.9 ft.) cable tail without connector
  • Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm
  • Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm
  • Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
  • All cable entries: IP68 cable gland

Electrical

  • AC power: 100 - 240 / 277 V nominal, 50/60 Hz
  • Power supply unit: Integrated, auto-sensing multi-voltage
  • Power Consumption: 3 W (steady state, all LEDs at zero intensity)
  • Typical half-cycle RMS inrush current: 10.3 A
  • Surge protection: 4 KV
  • Maximum total power consumption: 185 W

Typical Power and Current

  • 100 V, 60 Hz: 1.6 A, 160 W, PF 0.99
  • 120 V, 60 Hz: 1.35 A, 160 W, PF 0.99
  • 230 V, 50 Hz: 0.75 A, 160 W, PF 0.94
  • 277 V, 60 Hz: 0.65 A, 160 W, PF 0.89
Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

  • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 45° C (113° F)*
  • Minimum ambient temperature (Ta min.): -30° C (-22° F)**
  • Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F)
  • Total heat dissipation (calculated, +/- 10%): 485 BTU/hr
*Above this temperature, the fixture regulates output to protect from overheating
**Power must be maintained below -20° C (-4° F)

Approvals

  • EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1
  • EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5
  • US safety: ANSI/UL 1598
  • US EMC: 47 CFR Part 15 Class A
  • Canadian safety: CSA C.22.2 No. 250
  • Australia/NZ: RCM
More Information
Condition New
Brand Martin Professional