Martin - P3 Powerport 1000 Install for LC & VC-grid series

Martin - P3 PowerPort™ 1000 Install for LC & VC-grid series 

The P3 PowerPort 1000 IP Install is an integrated power supply and data processor for Martin’s range of creative LED video products, including the Exterior PixLine™ and VC-Dots™. When driven by one of Martin’s award-winning P3™ System Controllers™, it combines stable power delivery with high-speed, high-capacity video processing. Setup and configuration are easy and intuitive. A full outdoor rating and optional fiber interface make the product perfect for permanent outdoor installations.

Features

• P3 image processing technology
• Set-up and addressing via P3 System Controller family
• No local configuration needed
• P3 input and thru to allow daisy-chaining
• Optional fiber-interface
• 4 hybrid power/data output ports
• Wall-mountable or free-standing
• Can be located up to 50 m away from the creative LED video products
• IP66

Physical

• Length: 426 mm (16.8 in.)
• Width: 483 mm (19.1 in.)
• Height: 146 mm (5.8 in.)
• Weight: 8 kg (17.7 lbs.)

Control and programming

• Addressing and status: Via P3 System Controller
• Mapping: Via P3 System Controller
• Firmware update: Via P3 System Controller

Control/user interface

• Device status: Multicolor status LED
• Power output status: Four LEDs
• Data output status: Four LEDs
• Device test and reset: Pushbutton to call up local test patterns and reset device
• Status LEDs and pushbutton can be disabled remotely if required.

P3 signal protocol

• Signal type: Gigabit Ethernet
• Protocol : Proprietary Martin P3
• Hot pluggable: Yes, electrically isolated at all connections
• Cable type: Ethernet, CAT 5e or better
• Cable length: Up to 100 m (328 ft.) between any 2 devices, extendable with Ethernet switch or conversion to fiber

System integration

• VDO Sceptron™ family
• VDO Fatron™ family
• VDO Dotron™ family
• Exterior PixLine™ family
• Exterior Dot-HP™ family
• VC-Grid™ family (indoor product)
• VC-Strip™ family (indoor product)
• VC-Dot™ family via VC-Feeder™

Construction

• Housing: Aluminum
• Color: Alu grey (customized colors available on project basis)
• Protection rating: IP66
• NEMA enclosure rating: Type 3
• Effective Projected Area (EPA): 0.21 m2
• Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
• RoHS compliant

Installation

• Mounting: Brackets for installation on flat surface
• Orientation: Any, except with cable glands facing up or lid facing down

Connections

• Power input: Cable gland (M20), internal screw terminals
• P3 data in/out: Two cable glands (M16), two internal RJ45 connectors (if copper-to-fiber unit is installed, one cable gland can be used for fiber)
• M16 cable glands accept 5.5 - 10 mm cable, M20 glands accept 8-13 mm cable.
• Combined power & data out: Four cable glands (M16), internal screw terminals

Electrical

• AC power: 120-277 V nominal, 50/60 Hz
• Typical total power consumption: 1000 W (including full load of connected display devices, all at full intensity)
• Typical half-cycle RMS inrush current: 20.9 A
• Power supply unit: Auto-ranging electronic switch-mode
• Total power consumption in idle state (at 25° C, all connected devices powered off): 22 W