Martin | Exterior Dot-4 Pro, 200mm, 64 pcs, 2m ld

Martin | Exterior Dot-4 Pro, 200mm, 64 pcs, 2m ld

The Martin Exterior Dot-4 Pro is a lightweight string of individually-controllable RGBW-based Dots, useful in creating customized LED video solutions with maximum artistic flexibility and minimal effort. Each Exterior Dot is color- and brightness-calibrated for superior visual consistency across the entire installation. Exterior Dot-4 Pro is controllable via Martin P3 System Controllers or any sACN or Art-Net-based controller.

It is the perfect solution for integrating LED video technology into façades, landmarks, architectural elements or any other structure, indoors or out. Exterior Dot-4 Pro strings are fully configurable in terms of number of Dots, pixel pitch, and length of lead-in cable for perfect integration into architectural elements.

Mapping video onto Exterior Dots is quick and intuitive via the P3 System Controller, eliminating the need for complex setups and time-consuming addressing. Each Exterior Dot-4 Pro includes four RGBW LEDs with a total luminous intensity of 20 candela.

Unifying unparalleled performance, adaptability, and intuitive operation, the Exterior Dot Pro family doesn’t just enable lighting designers and professionals to surpass the limitations of traditional systems, it inspires them to redefine the boundaries of creative video design.

Features

• Flexible, string-based, direct-view LED lighting
• Powered via Exterior AC-Feeder or Exterior DC-Feeder
• Fully-weatherized housing (IP67, IK08 and C-5 High corrosion rating)
• Martin P3/Art-Net/sACN compatible (automatic protocol detection)
• Setup and Addressing via RDM over Art-Net or Martin P3
• Real-time status feedback via RDM over Art-Net and Martin P3
• Individually-controllable RGBW Dots
• Color boost for bright, saturated, and mixed colors
• Dedicated color temperature control channel
• In-built Effect Macros (FX) for easy creation of stunning looks
• Up to 64 Dots per string
• Reduced power mode for cost-effective systems
• Configurable number of dots, pixel pitch, and lead-in cable length
• Superior color and brightness consistency based on factory calibration
• Stand-alone programming with up to 20 scenes
• Intuitive mapping and addressing via P3 System Controller family
• Smart accessories such as diffused dome and glare shield
• Easy and safe mounting options using brackets or profiles
• Hot-pluggable string connector
• Shipped in FSC-certified carboard packaging
• 5-year warranty

Physical:
Pixel dimensions: 59 x 32.4 x 13.2 mm (2.3 x 1.27 x 0.52 in.)
Pixel dimensions with dome: 59 x 32.4 x 28.8 mm (2.3 x 1.27 x 1.13 in.)
Weight: 2.96 kg (64 Dots, 200 mm spacing, incl. 2 m lead-in cable)
Maximum number of pixels per string: 64
Standard pixel spacing (pitch): 200 mm (7.9 in.)
Minimum pixel spacing (pitch): 155 mm (6.1 in.)
Maximum pixel spacing (pitch): 2000 mm (78.8 in.)
Maximum lead-in cable length: 5 m (up to 10 m with Active Lead-In Cable Extender)

Control and Programming:
Control resolution: 16-bit (P3) or 8-bit (DMX) per color
Control protocols: Martin P3, Art-Net, sACN
Protocol detection: Automatic
DMX modes: Standard, Extended, Raw, PixelMap (6 modes)
DMX channels: 3, 4, 6, 12, 24, 48, 96, 192
RDM compliance: ANSI/ESTA E1.20
Art-Net compliance: Art-Net 1, 2, 3 and 4 (including RDM over Art-Net)
sACN compliance: ANSI E1.31 – 2016
Martin P3 compliance: P3 System Controller Software 6.1.0 or newer

Optics:
Light source: 4 RGBW LEDs
Minimum LED lifetime: 100,000 hours (to >70% luminous output)
LED manufacturer: Lumileds
Binning: Tight color and flux binning
Calibration: Full Gamut Pixel Calibration

Photometric Data:
Viewing angle: 150°
Viewing angle with dome: 180°
Cut-off angle: 120°
Luminous intensity: 26 cd (clear front), 5 cd (diffused dome)
Luminous output: 71 lm (clear front), 29 lm (diffused dome)
Red output: 22 lm (clear front), 10 lm (diffused dome)
Green output: 65 lm (clear front), 28 lm (diffused dome)
Blue output: 13 lm (clear front), 5 lm (diffused dome)

Construction:
Dot material: Clear polycarbonate, black silicone filled
Diffuser dome: White translucent polycarbonate
Interconnecting cable: 6 x 20 AWG, black
Minimum cable bend radius: 15 mm (0.59 in.)
Protection rating: IP67
Corrosion resistance: C5 High (ISO 12944-6)
Vibration resistance: IEC 60068-2-6, IEC 60068-2-64, ANSI C136-31

Installation:
Mounting points: Mounting bracket, mounting profile, four integrated cable tie holes
Orientation: Any

Connections:
Power & data input: Custom 8-pin connector, IP67-rated

Electrical:
Power and data converter: Exterior AC-Feeder or Exterior DC-Feeder
Operating voltage: 15 VDC
Maximum power consumption: 1.5 W per Dot (full power mode)
Half power consumption: 0.75 W per Dot
Typical power consumption: 0.5 W per Dot

Thermal:
Cooling: Convection
Maximum ambient temperature: 55°C (131°F)
Minimum ambient temperature: -30°C (-22°F)
Peak heat dissipation: 5.1 BTU/hr
Typical heat dissipation: 1.7 BTU/hr

Environmental:
RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Packaging: FSC-certified cardboard
Efficacy: 47 lm/W
Lumen-to-Weight Ratio: 1535 lm/kg (590 lm/lb)

Approvals:
Global CB Certification/IECEE: EC 62368-1
EU safety: EN62638-1
EU EMC: EN 55032, EN55035, EN 61000-3-2, EN 61000-3-3
US safety: UL 62638-1
US EMC: 47 CFR Part 15 Class A
Canadian safety: CSA C22.2 No. 60238-1
Australia/NZ: RCM
United Kingdom: UKCA
India: BIS IS 10322 (Part 5/Section 7)

Related Items:
Exterior AC-Feeder: P/N MAR-90580003
Exterior DC-Feeder: P/N MAR-90580004
Martin P3 PowerPort 2000: P/N MAR-90721200
Martin P3 PowerPort 500 IP Rental: P/N MAR-90721201
Martin P3 PowerPort 500 IP Install: P/N MAR-90721202
Martin DCE PSU 240 IP: P/N MAR-90721203
DCE DataSplitterBooster IP: P/N MAR-90721204
Martin P3-175 System Controller: P/N MAR-90721100
Martin P3-275 System Controller: P/N MAR-90721101

Accessories:
Loose ribbon cable (10 m): P/N MAR-90580022
Active Lead-In Cable Extender (5 m): P/N MAR-90580023
Dome Kit Dot-4 Pro (Grey, Set of 10): P/N MAR-90580012
Dome Kit Dot-4 Pro (Black, Set of 10): P/N MAR-90580015
Mounting Bracket Dot-4 Pro (Grey, Set of 10): P/N MAR-90580009
Mounting Bracket Dot-4 Pro (Black, Set of 10): P/N MAR-90580033
Glare Kit Dot-4 Pro (Grey, Set of 10): P/N MAR-90580006
Glare Kit Dot-4 Pro (Black, Set of 10): P/N MAR-90580030
Mounting Profile Dot-4 Pro, 2 m: P/N MAR-90580018
End Cap Mounting Profile Dot-4 Pro (Set of 2): P/N MAR-90580027
String Termination Cap (Set of 2): P/N MAR-90580021
Splice Connector (Set of 3): P/N MAR-90580020
Exterior Multitool: P/N MAR-90590025

Ordering Information:
Exterior Dot-4 Pro, 200 mm, 64 pcs, 2 m lead: P/N MAR-90580001
Other configurations available upon request (minimum order quantity: 800 dots)