L-ISA Processor II Core is a hardware solution dedicated to advanced real-time audio processing. Designed as a multi-purpose device it has no pre-installed software application licenses. L-ISA Processor II Core brings the capacity to choose the processing mode and output channel count required while utilizing the same adaptable hardware. Users can choose the software layer they need from L-ISA object-based mixing and spatial systems or Source Intelligence vocal enhancement. L-ISA Processor II Core provides state of the art audio experience from intimate installations to the largest tours, and can deliver 128 inputs and up to 128 outputs using Milan-AVB and MADI protocols. L-ISA Processor II Core offers a scalable licensing model, with L-ISA license packs from 16 to 128 outputs, which can be upgraded upon users‘ requirements or a Source Intelligence subscription . The chassis integrates a robust mechanics and locking connectors, and includes two redundant universal power supplies. When required, a second processor can be used in mirror mode for further redundancy. As a Milan-certified device, L-ISA Processor II Core also ensures reliability for audio distribution with seamless Milan network redundancy for all AVB streams.
Power supply: Universal Switched Mode Power Supply (SMPS) with power factor correction (PFC) Mains rating: Redundant power supplies: 2 x 100 V - 240 V ~ ±10%, 50-60 Hz, 350 W Connector: IEC C13 V-lock™ compatible Audio inputs - Milan-AVB: Supporting Milan seamless redundant networking, 64 AVB channels (8 redundant streams of up to 8 channels), 2 x etherCON™ Gigabit ports for AVB primary and secondary Audio inputs - MADI: 192 channels at 44.1 or 48 kHz / 96 channels at 96 kHz, 3 x BNC connectors Audio inputs - AES/EBU: 2 channels (1 x AES3) at 44.1, 48 or 96 kHz, 1 x XLR female connector Audio outputs - Milan-AVB: Supporting Milan seamless redundant networking, 128 AVB channels (16 redundant streams of up to 8 channels), 2 x etherCON™ Gigabit ports for AVB primary and secondary Audio outputs - MADI: 64 channels at 44.1 or 48 kHz / 32 outputs at 96 kHz, 1 x BNC connector Audio outputs - AES/EBU: 2 channels (1 x AES3) at 44.1, 48 or 96 kHz, 1 x XLR male connector Headphones: Analog stereo headphones, 6.3 mm TRS Audio clock sources: Milan-AVB CRF input and output streams, audio input and output streams Word clock: Input and output on BNC connectors MADI: Input and output on BNC connectors AES/EBU: Input on XLR connector DSP: L-ISA processing at 96 kHz, 96 objects rendered to a maximum of 128 outputs (depending on license pack) L-ISA parameters: Pan, Width, Distance, Elevation, Aux Send Room engine: Direct audio routing, audio format conversion MADI to AVB or AVB to MADI, AVB to AVB stream multiplexing Sampling rates: 44.1 kHz (MADI and AES/EBU only), 48 kHz, 96 kHz Latency: 3.2 ms (input to outputs) Boot time: 31 s to AVB audio pass through Network connection: Ethernet Gigabit interface with etherCON™ connector Remote control software: L-ISA Controller or any HTTP-based third-party control device Operating temperature: -5 °C / 23 °F to +50 °C / 122 °F Maximum altitude: 2000 m / 6500 ft Dimensions: W x H x D: 483 x 133.35 (3U) x 458 mm / 19 x 5.25 (3U) x 18 in Weight: 11 kg / 24.3 lb