Martin | Exterior Projection Pro Compact Black

The Martin Exterior Projection Pro Compact is a next-generation outdoor image projector designed to inspire captivating creativity and versatility across a diverse range of architectural, façade, and landscape applications.

Featuring a modular design with 11 configurable options and up to four layers of effects, including precise façade framing, the fixture offers a broad spectrum of creative possibilities while minimizing complexity and cost. Its compact footprint and lightweight design facilitate pole mounting and seamless integration into various setups, delivering multiple application possibilities. The fixture’s sleek, professional appearance ensures it blends effortlessly into any environment.

The built-in zoom system enables precision adjustment of the projection angle from 15° to 45°, supported by an ultra-efficient optical system that consistently delivers 5,200 lumens across the entire zoom range. Engineered for maximum energy efficiency, the fixture includes a dedicated hibernation power mode, activated through the DMX control channel, significantly reducing power consumption when not in use.

Empowering users with control over multiple dynamic effects—including zoom, focus, colors, gobos, and animations—the Exterior Projection Pro Compact inspires the most creative applications. Using the optional framing module, the projected image can be framed to precisely match the façade. Smart controls feature a magnetic switch, DMX, RDM, and stand-alone programming via Martin Companion ensuring straightforward configuration and programming.

Engineered to meet stringent environmental standards, the fixture reduces its carbon footprint through its efficient optical system, FSC-certified packaging, and full repairability. Designed for permanent outdoor installations, it is fully outdoor-rated to withstand the harshest environmental conditions and is backed by Martin’s full, 5-year warranty.

With its modular design, compact form factor, and state-of-the-art features, the fixture is an incredibly advanced and cost-effective solution. Ideal for architectural lighting designers, architects, system integrators, and electrical contractors, it offers unmatched performance, versatility, and user-friendly operation.

Specifications

Physical

Length: 342 mm (13.5 inch)
Width: 272 mm (10.7 inch)
Height: 335 mm (13.2 inch)
Weight: 12.5-13.9 kg (27.5–30.6 lbs) (depends on actual configuration)

Dynamic Effects

Color wheel: 5 dichroic colors (red, green, blue, yellow, CTO) + open
Zoom: Motorized, 15° - 45° beam angle
Dimming: Electronic, 0-100% continuous dimming
Shutter: Strobe and pulse effects, instant open and blackout
Focus: Motorized, variable 3 m (9.8 ft.) to infinity
Accessory 1-gobo module: indexing, variable rotation
Accessory 4-gobo module: selection, indexing, variable rotation
Accessory animation module: Continuous rotation with variable speed and direction (always in aperture)
Accessory Framing module: 4 blades for manual adjustment of insert and angle (8 finger knobs with locking mechanism)

Control and Programming

User interface: Magnetic sensor to call up fixture status and focus fixture
Stand-alone control: Up to 20 scenes with individual fade/hold times
Control options: DMX, RDM, stand-alone
Configuration, addressing and status: Via RDM
8-bit control: Color and gobo selection
16-bit control: Gobo indexing and rotation, Animation, Focus, Zoom and Intensity
DMX channels: 13/14 (Basic / Extended)
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20

Optics

Light source: 130W White light LED engine
LED lifetime: minimum 30,000 hours (to >70% luminous output)*
Full Zoom Range: 15° - 45° (Field Angle)
*Figure obtained under manufacturer's test conditions

Photometric Data

CRI (Color Rendering Index): >70
Color Temperature: 7,500 K
Total output: 5,200 lumens
*All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

Construction

Housing: Cast aluminum
Finish: Hard anodized
Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
Ingress protection: IP66
Impact resistance: IK08
Corrosion resistance: C5 (very high corrosivity / marine, ISO 12944)
Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
EPA (Effective Projected Area): 0.1 m²
Color options: Traffic Grey RAL 7042, Traffic White RAL 9016, Traffic Black RAL 9017
Service Lid for gobo change or insert of accessory effect modules

Gobos

Suitable material: Borosilicate glass, coatings heat resistant to 450°C (842°F)
Gobo diameter: 19.0 mm +0/-0.3 mm (0.74 in. +0/-0.02 in.)
Maximum image diameter: 15 mm (0.59 in.)
Glass gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
Glass gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12 in. ±0.012 in.)
Aluminum gobo thickness: 0.5 mm ±0.02 mm (0.020 in. ±0.001 in.), HT paint

Installation

Mounting: Adjustable yoke
Orientation: Any, except horizontal angles above 70°
Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Connections

Power cable entry: IP68 cable gland (accepts 8 mm-12 mm)
Power connection: Terminal for power in separate compartment
Data cable entry: Terminal for power in separate compartment
Data connection: Terminal for data in separate compartment

Electrical

AC power: 100-240/277 V nominal, 50/60 Hz
Power supply: Auto-ranging electronic switch-mode
Surge protection: 4 KV
Max earth-leakage current: 0.4 mA
Power factor: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
Max current draw: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
Typical current draw: 1.48 A @110 V, 0.71 A @230 V, 0.63 A @ 277 V *

Power Consumption

Maximum: 180 W
Typical: 160 W *
Idle: 10 W *
Hibernation: 3 W *
*Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Typical: full output, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.
Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

Thermal

Cooling: Convection and forced air (temperature regulated)
Maximum surface temperature: 60° C (140° F)
Maximum ambient temperature (Ta max.): 45° C (113° F) *
Minimum ambient temperature (Ta min.): -30° C (-22° F) **
*Above this temperature, the fixture regulates output to protect from overheating.
**For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
FSC: Certified cardboard outer packaging
Efficacy (max output): 32.9 lm/W
LWR*: 416 lm/kg (189 lm/lbs)
*LWR = Lumen-to-Weight Ratio

Approvals

Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55032 (Class B), EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: ANSI/UL 1598
US EMC: CFR 47 Part 15 Class B
Canadian safety: CSA C22.2 No 250.13
Canadian EMC: CAN ICES (B)/ NMB(B)
Australia/NZ: RCM
BIS certification: (Pending)

Related Items