Shure | P10TE - J8E (554-626 MHz) - PSM 1000 Transmitter

Shure - P10TE - J8E (554 - 626 MHz)

The P10T is a networkable, full-rack, dual channel wireless transmitter used in conjunction with the P10R Wireless Bodypack Receiver as part of the PSM®1000 Personal Monitor System. It offers a 72 MHz wide tuning bandwidth, networked remote control via Wireless Workbench® software, advanced rechargeability options, and PSM®900 backwards compatibility.

Connections include balanced ¼” and XLR, loop out, dual Ethernet ports, and headphone monitor out.

Comes with front or back mountable antennas, and power and Ethernet jumper cables.

Features

• Full rack, dual-channel transmitter in a professional, touring grade chassis
• 72 MHz wide tuning range provides flexibility and performance in crowded, unpredictable RF environments
• Backwards-compatible with PSM®900 receivers
• RF Mute Switch allows system setup without causing RF interference
• Sync RF scan information from a P10R bodypack quickly and easily over IR link
• Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
• Spectrum display provides a detailed frequency plot on the menu screen with selectable zoom
• Front panel audio input gain adjustment and LED level meter with clipping indicator
• Exceptional transmitter linearity vastly reduces frequency intermodulation, allowing more compatible channels per frequency range
• High-contrast LCD with grouped menu items provides an intuitive user interface
• Front or back mountable antennas
• Compatible with PA821B and PA821A antenna combiners
• Loop out connectors for multiple mix setups and easy installation
• Switchable +4dBu and -10 dBV input level
  Balanced, ¼" and XLR connectors
  1/8" headphone out on the front panel for easy monitoring

PSM 1000

• RF Carrier Range: 470–952 MHz, varies by region
• Compatible Frequencies: Per band 39
• Tuning Bandwidth: 72–80 MHz, Note: varies by region
• Operating Range: environment dependent, 90 m ( 300 ft)
• Audio Frequency Response: 35 Hz–15 kHz (±1 dB)
• Signal-To-Noise Ratio: A-Weighted, 90 dB (typical)
• Total Harmonic Distortion: ref. ±34 kHz deviation @1 kHz, <0.5% (typical)
• Companding: Patented Shure Audio Reference Companding
• Spurious Rejection: ref. 12dB SINAD, >80 dB (typical)
• Frequency Stability: ±2.5 ppm
• MPX Pilot Tone: 19 kHz (±0.3 kHz)
• Modulation: FM*, MPX Stereo, *ref. ±34 kHz deviation @1 kHz
• Operating Temperature: -18°C to +57°C

P10T

• RF Output Power: selectable: 10, 50, 100 mW (+20 dBm)
• RF Output Impedance: 50 Ω (typical)
• Net Weight: 4.7 kg (10.4) lbs
• Dimensions: 44 x 483 x 343 mm (1.7 x 19.0 x 13.5 in.), H x W x D
• Power Requirement: 
• Input: 100–240 V AC, 50/60 Hz, 0.5 A max. (5.5, with outlet loaded)
• Output: 100–240 V AC, 50/60 Hz, 5 A max., unswitched
• Audio Input:
• Connector Type: Combination XLR and 6.35 mm (1/4") TRS
• Polarity:
• XLR: Non-inverting (pin 2 positive with respect to pin 3)
• 6.35 mm (1/4") TRS: Tip positive with respect to ring
• Configuration: Electronically balanced
• Impedance: 70.2 kΩ (actual)
• Nominal Input Level: switchable: +4 dBu, –10 dBV
• Maximum Input Level: +4 dBu +29.2 dBu -10 dBV +12.2 dBu
• Pin Assignments: 
• XLR: 1=ground, 2=hot, 3=cold
• 6.35 mm (1/4") TRS: Tip=hot, Ring=cold, Sleeve=ground
• Phantom Power Protection: Up to 60 V DC
• Audio Output: 
• Connector Type: 6.35 mm (1/4") TRS
• Configuration: Electronically balanced
• Impedance: Connected directly to inputs
• P10R+: 
• Tri-Band RF Filtering: –3 dB at 30.5 MHz from the center frequency of each band
• Active RF Gain Control: 31 dB, Adjusts RF sensitivity to provide more RF dynamic range
• Active RF Sensitivity: at 20 dB SINAD, 2.2 µV
• Image Rejection: >90 dB
• Adjacent Channel Rejection: >70 dB
• Latency: 0.37ms
• Squelch Threshold: 22 dB SINAD (±3 dB), default setting
• Intermodulation Attenuation: >70 dB
• Blocking: >80 dB
• Audio Output Power: 1 kHz at Less than 1%distortion, Maximum Headphone Output Power, at 16 Ω, 100 mW (per output)
• Minimum Load Impedance: 4 Ω
• Output Impedance: <1 Ω
• 4-band Parametric EQ: 
• Low Shelf: Selectable Gain: ±2 dB, ±4 dB, ±6 dB @ 100 Hz
• Low Mid: Selectable Gain: ±2 dB, ±4 dB, ±6 dB at 160 Hz, 250 Hz, 400 Hz, 500 Hz, 630 HzSelectable Q: 0.7, 1.4, 2.9, 5.0, 11.5
• High Mid: Selectable Gain: ±2 dB, ±4 dB, ±6 dB at 1 kHz, 1.6 kHz, 2.5 kHz, 4 kHz, 6.3 kHzSelectable Q: 0.7, 1.4, 2.9, 5.0, 11.5
• High Shelf: Selectable Gain: ±2 dB, ±4 dB, ±6 dB @ 10 kHz
• Volume Limiter: Selectable: OFF (0 dB) to -48 dB in 3 dB steps
• Volume Lock: Selectable: 0 dB to -70 dB, Limits volume adjustment knob. Selected value analogous to volume knob increment.
• Net Weight: 158 g (Without Battery)
• Dimensions: 99 x 66 x 23 mm (3.9 in. x 2.6 in. x 0.9 in.) H x W x D
• Battery Life: 4–6 hours (continuous use) AA batteries