Martin | Exterior DOT-1 PRO, 115MM, 100PCS, 2M LD Martin | Exterior DOT-1 PRO, 115MM, 100PCS, 2M LD Martin | Exterior DOT-1 PRO, 115MM, 100PCS, 2M LD Martin Exterior Dot-1/4/9 Pro Overview | Outdoor-Rated RGBW LED Dots | Architectural Lighting
Martin | Exterior DOT-1 PRO, 115MM, 100PCS, 2M LD

Martin | Exterior DOT-1 PRO, 115MM, 100PCS, 2M LD

List price:
€1,498.18 Excl. Tax
Your price:
€1,393.31 Excl. Tax
Your discount: 7%
Delivery:
Ca. 8 working days*
Art. code
MP-18.0002

Martin | EXTERIOR DOT-1 PRO, 115MM, 100PCS, 2M LD

The Martin Exterior Dot-1 Pro is a lightweight string of individually-controllable RGBW-based Dots, useful in creating customized LED video solutions with maximum artistic flexibility and minimal effort. Each Exterior Dot is color- and brightness-calibrated for superior visual consistency across the entire installation. Exterior Dot-1 Pro is controllable via Martin P3 System Controllers or any sACN or Art-Net-based controller.

It is the perfect solution for integrating LED video technology into façades, landmarks, architectural elements or any other structure, indoors or out. Exterior Dot-1 Pro strings are fully configurable in terms of number of dots, pixel pitch, and length of lead-in cable for perfect integration into architectural elements.

Mapping video onto Exterior Dots is quick and intuitive via the P3 System Controller, eliminating the need for complex setups and time-consuming addressing. Each Exterior Dot-1 Pro includes one RGBW LED with a total luminous intensity of 5 candela.

Unifying unparalleled performance, adaptability, and intuitive operation, the Exterior Dot Pro family doesn’t just enable lighting designers and professionals to surpass the limitations of traditional systems, it inspires them to redefine the boundaries of creative video design.

Features

  • Flexible, string-based, direct-view LED lighting
  • Powered via Exterior AC-Feeder or Exterior DC-Feeder
  • Fully-weatherized housing (IP67, IK08 and C-5 High corrosion rating)
  • Martin P3/Art-Net/sACN compatible (automatic protocol detection)
  • Setup and Addressing via RDM over Art-Net or Martin P3
  • Real-time status feedback via RDM over Art-Net and Martin P3
  • Individually-controllable RGBW Dots
  • Color boost for bright, saturated, and mixed colors
  • Dedicated color temperature control channel
  • In-built Effect Macros (FX) for easy creation of stunning looks
  • Up to 100 Dots per string
  • Reduced power mode for cost-effective systems
  • Configurable number of dots, pixel pitch, and lead-in cable
  • Superior color and brightness consistency based on factory calibration
  • Stand-alone programming with up to 20 scenes
  • Intuitive mapping and addressing via P3 System Controller family
  • Smart accessories such as diffused dome and glare shield
  • Easy and safe mounting options using brackets or profiles
  • Hot-pluggable string connector
  • Shipped in FSC-certified carboard packaging
  • 5-year warranty

Physical

  • Pixel dimensions: 45 x 24.8 x 11.2 mm (1.77 x 0.98 x 0.44 in.)
  • Pixel dimensions with dome: 45 mm x 25 mm x 22.2 mm (1.77 x 0.98 x 0.87 in.)
  • Weight: 2.48 kg (5.47 lbs.) for 100 Dots, 115 mm (4.52 in.) spacing, with 2 m (6.6 ft.) lead-in cable and connector
  • Maximum number of pixels per string: 100
  • Standard pixel spacing (pitch): 115 mm (4.52 in.)
  • Minimum pixel spacing (pitch): 115 mm (4.52 in.)
  • Maximum pixel spacing (pitch): 2000 mm (48.8 in.)
  • Maximum lead-in cable length: 5 m (196.9 in.)
    • Up to 10 m using Active Lead-In Cable Extender

Control and Programming

  • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
  • Control Protocols: Martin P3, Art-Net, sACN
  • Protocol detection: Automatic
  • DMX Modes: Standard, Extended, Raw, PixelMap (6 pixel modes)
  • DMX channels: 6, 12, 4, 3, 21, 39, 75, 150, 300
  • RDM compliance: ANSI/ESTA E1.20
  • Art-Net Compliance: Art-Net 1, 2, 3 and 4 (including RDM over Art-Net)
  • sACN Compliance: ANSI E1.31 – 2016
  • Martin P3 Compliance: P3 System Controller Software 6.1.0 or newer

Optics

  • Light source: 1 RGBW LED
  • Minimum LED lifetime: 100,000 hours (to >70% luminous output) *
  • LED manufacturer: Lumileds
  • Binning: Tight color and flux binning
  • Calibration: Full Gamut Pixel Calibration
  • Figure obtained under manufacturer's test conditions at Ta = 25° C

Photometric Data

  • Viewing angle: 140°
  • Viewing angle with dome: 180°
  • Cut-off angle: 100°

Luminous Intensity

  • Full @ 6500K: 7 cd (clear front), 1.5 cd (diffused dome)

Luminous Output *

  • Full @ 6500K: 18 lm (clear front), 7 lm (diffused dome)
  • Red: 6 lm (clear front), 2.5 lm (diffused dome)
  • Green: 18 lm (clear front), 6 lm (diffused dome)
  • Blue: 4 lm (clear front), 1.5 lm (diffused dome)
  • All photometric data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction

  • Dot: Clear polycarbonate, black silicone filled
  • Diffuser dome: White translucent polycarbonate
  • Interconnecting cable: 6 x 20 AWG, black
  • Minimum cable bend radius: 15 mm (0.59 in.)
  • Protection rating: IP67
  • Corrosion resistance: C5 High (ISO 12944-6)
  • Vibration resistance:
    • 1.0g, Sinusoidal (IEC 60068-2-6)
    • 0.7g RMS Random (IEC 60068-2-64)
    • 3.0g (ANSI C136-31)

Installation

  • Mounting points:
    • Mounting bracket
    • Mounting profile
    • Four integrated mounting holes for cable ties
  • Orientation: Any

Connections

  • Power & data input to string from Feeder: Custom 8-pin connector, IP67-rated

Electrical

  • Power and data converter: Exterior AC-Feeder or Exterior DC-Feeder
  • Operating voltage: 15 VDC

Power Consumption

  • Maximum: 1.0 W per Dot
  • Typical: 0.33 W per Dot
  • Idle: 0 W per Dot
  • Measurements made at nominal voltage. Allow for a deviation of +/- 10%
    • Max: Full intensity, full white
    • Typical: Video content
    • Idle: All LEDs at zero intensity

Thermal

  • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 55° C (131° F)
  • Minimum ambient temperature (Ta min.): -30° C (-22° F)
  • Peak heat dissipation: 3.4 BTU/hr (at full intensity, full white)
  • Typical heat dissipation: 1.4 BTU/hr (with typical video content)*
    • Figures for typical video content are indicative only and will vary.

Environmental

  • RoHS: Compliant
  • REACH: Compliant
  • WEEE: Compliant
  • Proposition 65: Compliant
  • Packaging: FSC certified cardboard inlay and outer packaging
  • Efficacy (max output): 15 lm/W
  • Lumen-to-Weight Ratio (LWR): 604 lm/kg (274 lm/lb)

Approvals

  • Global CB Certification/IECEE: EC 62368-1
  • EU Safety: EN 62638-1
  • EU EMC: EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3
  • US Safety: UL 62638-1
  • US EMC: 47 CFR Part 15 Class A
  • Canadian Safety: CSA C22.2 No. 60238-1
  • Australia/NZ: RCM
  • United Kingdom: UKCA
  • India: BIS IS 10322 (Part 5/Section 7)
More Information
Brand Martin Professional