Martin - RUSH PAR 4 UV

Martin - RUSH PAR 4 UV

The RUSH PAR 4 UV is a bright single-lens UV LED PAR can light fixture for use in blacklight applications. The fixture includes a 100 watt COB 400nm UV LED mounted in a reflector for high-output ultraviolet light, and has regulated air cooling for quiet operation. With electronic dimming and strobe and a bracket suitable for floor or truss mounting, the RUSH PAR 4 UV is ideal for a variety of nightlife, stage, and concert applications.

• Single-lens 100W UV LED PAR
• Electronic dimming and strobe

• Physical
• Length: 327 mm (12.8 in.)
• Width: 312 mm (12.3 in.)
• Height: 207 mm (8.1 in.)
• Weight: 4 kg (8.8 lbs.)
• Dynamic Effects
• Dimming: 0 – 100%, coarse & fine control
• Shutter: Strobe & pulse effects, instant open and blackout
• Control and Programming
• Control systems: USITT DMX512/1990 with RDM
• DMX channels: 3
• RDM compliance: ANSI/ESTA E.120
• Interface: Control panel with backlit LCD display
• Construction
• Housing: Cast aluminum
• Color: Black
• Protection rating: IP20
• Installation
• Mounting points: Adjustable bracket, surface or truss mount
• Location: Indoor location only
• Orientation: Any
• Minimum distance to combustible materials: 0.1 m (4 in.)
• Minimum distance to illuminated surfaces: 0.5 m (20 in.)
• Connections
• DMX/RDM in/out: 5-pin locking XLR
• AC power input/output: Neutrik PowerCon
• RUSH PAR 4 UV User Manual 31
• Electrical
• AC power: 100-240 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch mode
• Typical half-cycle RMS inrush current: 11.2 A
• Recommended Miniature Circuit Breaker when power linking: Type D*
• *Per IEC 60898/UL489/CSA C22.2 No. 5
• Maximum total power consumption: 114 W
• Typical Power and Current
• 100 V, 60 Hz: 114 W, 1.2 A, PF 1.000
• 120 V, 60 Hz: 114 W, 1.0 A, PF 0.996
• 230 V, 50 Hz: 114 W, 0.5 A, PF 0.933
• Measurements made at nominal voltage. Figures are typical, not maximum, allow for a deviation of +/- 10%.
• Thermal
• Cooling: Forced air, temperature-regulated
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): 0° C (32° F)
• Approvals
• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
• US safety: UL 1573
• US EMC: 47 CFR 15 Class A
• Canadian safety: CSA C22.2 No. 166
• Canadian EMC: ICES-003 Class A
• Australia/NZ: RCM
• Included Items
• Power cable, 1.5 m without mains plug
• Accessories
• Cables, 16 A, for connection to power in chains:
• Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
• Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
• Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
• Power relay cable 3 x 14 AWG,SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176
• Cables, 16 A, for power input:
• Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
• Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
• Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
• Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
• (H07RN-F are European approved cables, SJOOW are US approved cables)
• Power connectors:
• Power Connector PowerCON Male: P/N 91611795
• Power Connector PowerCON Female: P/N 91611794
• Installation hardware:
• Half-coupler clamp: P/N 91602005
• G-clamp (vertical hanging suspension only): P/N 91602003
• Quick-trigger clamp (vertical hanging suspension only): P/N 91602007
• Safety cable, 60Kg, BGV C1: P/N 91604006
• Related Items
• Martin M-DMX with Martin Companion Uploader Software
• Ordering Information
• RUSH PAR 4 UV in cardboard box: P/N 90480140