Pharos - Rio 80 Pharos - Rio 80 Pharos - Rio 80
Pharos - Rio 80

Pharos - Rio 80

€ 950,26 Excl. BTW
Beschikbaarheid:
Op voorraad
Art. code
PA-20.1006

Pharos - Rio 80 Remote Input Output Device - 8 inputs, 0 outputs

The Pharos RIO 80, 44 and 08 (Remote Input Output) devices provide a convenient and scalable way to add inputs and outputs to a Pharos system for show control and integration. Each device can be placed where it is needed and connected to the Controllers over an Ethernet network. Each RIO has a multi-protocol serial port, supporting DMX input and output, and a combination of multi-functional digital/analog inputs and relay outputs.

The RIO is Power-over-Ethernet (PoE) powered, with a rugged DIN rail mounting enclosure and install-friendly connectors. It comes in three variants – one with eight inputs; one with eight outputs; and one with four of each. The inputs are individually configurable as contact closure, active low, active high or 0-24V analog level. The outputs are individually isolated relays (48V, 0.25A). All variants support a multi-protocol serial port.

Remote Devices allow the fully scalable Pharos system to be tailored to the needs of each individual project. Multiple Pharos Controllers can be used together with up to 200 Remote Devices and will synchronise automatically. The Controllers are programmed using the free Pharos Designer 2 software.

  • Certifications: CE compliant, ETL/cETL listed
  • Power: PoE (IEEE802.3af, Class 1) 1.5W typical
  • Required: Any Pharos Controller
  • Addressing: By rotary selector switch
  • Temperature: 0°C to 50°C (32°F to 122°F)
  • Physical: 4 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail))
  • Weight: 0.3 kg (0.7 lbs)
  • Recovery: Hardware watchdog and recessed reset button
  • Warranty: 5 years
  • Ethernet: RJ45 socket for 10/100Base-TX Ethernet with Link/Data LEDs; Fixed IP or DHCP; Power-over-Ethernet (PoE)
  • Serial: RS232 / RS485 / DMX out *
  • Inputs: Individually selectable operating mode for contact closure, digital or analog input (24V maximum) *
  • Relay Outs: Individually isolated (1KV) relay outputs (48V 250mA) *

* Install-friendly 0.200″ (5.08mm) plug in rising clamp connectors (included)

Meer informatie
Conditie Nieuw
Merk Pharos