LSC - APS12/10T Advanced Power System Wallmount - Terminals
LSC - APS12/10T Advanced Power System Wallmount - Terminals

LSC - APS12/10T Advanced Power System Wallmount - Terminals

€ 2.603,45 Excl. BTW
Levertijd:
Ca. 8 weken*
Art. code
LS-26.0000

LSC - APS12/10T Advanced Power System Wallmount - Terminals

APS Wallmount Power Distribution 12Ch x 10A – RCBO, hardwired

Power distribution is one of the most critical components of any lighting/video/audio system, particularly these days when almost every device needs its own mains power source. However, with each fixture requiring power, new issues are introduced particularly during the power-up sequence.

Firstly, inrush currents of all the power supplies and lamps starting up at the same time often cause main breakers to trip and secondly the transient currents drawn by the power supplies cause earth protection breakers to trip. Avoiding these effects results in complicated power-up sequences, usually requiring a user to switch circuits on one at a time.

Advanced Power System (APS) distribution units are an innovative solution to this and other issues by controlling the power-on sequence of each individual output circuit. A single command starts the sequence and then each of the 12 outputs is turned on one output at a time with a programmable time before the next circuit turns on. Therefore, the peak current drawn is always low and upstream breakers will not trip.
APS units can be connected where more than 12 circuits are required and the units automatically cascade so the second unit won't commence its start-up sequence until the first has finished.

The APS is ideal for permanent installations such as schools, places of worship, public halls and other venues where energy management is a key goal. By using APS modules to power the lighting and video systems, all LED fixtures, video screens and moving lights will automatically be powered off a few minutes after the lighting console is turned off. When the console is next turned on, the lighting and video equipment will be sequentially powered-up over a few seconds, without user intervention, a truly green solution.

  • Staggered start of outputs to reduce main circuit breaker nuisance tripping
  • Cascading start-up for individual units via link cabling and/or based on unit number
  • RCBO per channel with true relay switching – not solid state
  • 3.2” colour graphical LCD touchscreen with intuitive menu control
  • Control and remote monitoring via RDM or Houston-X
  • Control via input and output contact closure (GPI) or DMX512
  • Manual override via front-panel controls
  • Four configurable channel modes – Always On, Always Off, DMX Relay and Standard APS Mode (sequential start-up)
  • Mains zero-cross switching to reduce nuisance tripping of breakers
  • CE (European) and RCM (Australian) approved
  • Designed and manufactured in Australia by LSC – an Australian-owned company with over 30 years’ experience in developing world-first DMX512 products

Control

  • 3.2" colour LCD with touchscreen
  • programmable stand-alone mode via easy-to-use menus
  • DMX512 (1990) or DMX512-A (E1-11) input with RDM (E1-20) functionality on 5-pin XLR connectors
  • GPI voltage free contact closure on 5-pin XLR connectors (using pins 1+4)

Protection

  • 12 channel x 10A RCBO breakers with 30mA trip per channel
  • dropped neutral protection with almost instant load disconnect
  • programmable channel sequential start-up time delay
  • cascading start-up between multiple units
  • programmable min and max voltage cut-off per phase

Monitoring

  • 3-phase voltage and current levels monitoring on main display
  • remote configuration and monitoring via RDM protocol
  • remote configuration and monitoring via LSC’s HOUSTON X software

Power

  • nominal 100-240V, 3-phase star, 50-60Hz (single-phase operation possible, 63A maximum)
  • operating range typically 90-260V, 45-65Hz
  • all models supplied with L1, L2, L3, N, and E terminals for power connection

Mechanicals

  • 490mm (w) x 270mm (d) x 250mm (h)
  • weight: 16kg
  • full metal two-part hinged chassis with rear-screened polycarbonate labels
  • touchscreen, dimmer output connectors, RCBOs located on front panel
  • DMX input and GPI input located on right side panel
  • input power terminals housed internally, optional cable gland to allow flying tail to be connected

Peace of mind

  • CE (European) and RCM (Australian) approved
  • two-year warranty
  • designed and manufactured in Australia by LSC – an Australian-owned company with over 40 years’ experience in developing world-first products

 

 

Meer informatie
Conditie Nieuw
Merk LSC