Sound Projects - SP15E Sound Projects - SP15E Sound Projects - SP15E Sound Projects - SP15E
Sound Projects - SP15E

Sound Projects - SP15E

Bruto prijs:
€ 2.500,00 Excl. BTW
Uw prijs:
€ 1.500,00 Excl. BTW
Uw korting: 40%
Beschikbaarheid:
Niet meer leverbaar
Art. code
SP-30.0210

Sound Projects - SP15E

The SP15E is a compact self-powered high SPL subbass system. The cabinet is constructed of a rigid, multilayer birch ply reinforced with multiple bracing and finished with a sturdy coating. An impressive featherweight of 50 kg solid sub due to an inventive cabinet construction loading a light, 4 inch coil, neodymium driver and ultralight 2500 Watt CCD amp.

Cabinet dimensions are optimised for international trucksize. Eight barhandles placed in an ergonomical grippoint layout, Nano Armor polyurethane coating and additional corner protection with muliple slide bars facilitate easy transport. Locked, stable stacking of several cabinets is easy because of the protective slidebars. Polemounting can be done both standing or flat depending on available floorspace. The SP15E will endow any F.O.H. system with a rock solid foundation in the lowest audible octaves.

A recessed switch facilitates Sound Projects’ standard* or free external lowpass selection. The SALC (Single Audio-logic Level Control) speaker management maintains the tonal balance of the sound as perceived by the human ear and protects the drivers from over excursion or overheating. Maximum sub efficiency for the desired cabinet dimensions is obtained by creativity as well as state-of-the-art computer aided modelling techniques and acoustic calculation programs.
*60Hz @ 24dB Butterworth

Acoustical specifications
Drivers: 1 x 15" High Power, Low distortion, long excursion design, double impregnated spider and ventilated coil airgap for reduced power compression
Freq. Reponse: 30-60Hz/~90Hz switchable: Sub Mode/SPX Mode
Max. peak SPL @ 1m: 136 dB (Peak level at 1M: under half space conditions using pink noise with crest factor 4 (12dB))
Coverage angle: Omni-directional

Electrical specifications
Amplifier(s): CCD(TM) technology
Output: 2500W sine (SALC limited) Specified at 4 ohm
Filter subsonic: 30Hz, 2nd order
Low pass 4th order: 60Hz / ~90Hz (switchable) Full range option on request
Input impedance: 20 kOhms balanced, 10 kOhms unbalanced
Output impedance: Hard-wired to input
Main voltage: 230V (other on request)
Mains frequency: 50 / 60 Hz
Idle: < 50VA
Full load: < 1200 VA. DALC limited Ref. to continuous pink noise signal (12 dB crest factor within the specified range)
Protection: S.A.L.C. (Single Audio Logic Control)

Additional descriptive data
Cabinet construction: Cross grain laminated multiplex with multiple bracings
Finish: Nano-armor(TM) coating
Weight (in KG): 47 Wheels not included, optional wheel board available
With (in mm): 450
Height (in mm): 750
Depth (in mm): 620
Depth with wheels (in mm): 748
Rigging points: Optional uni rigging (3x M20 bolt)
Audio connectors: IEC XLR-3 in/out
Main connectors: Powercon in and out
Max operating temp.: -10C to 40C ambient

Meer informatie
Conditie Nieuw
Merk Sound Projects
Mogelijk ook interessant voor u