Luminex - GigaCore 14R

Luminex - Gigacore 14R

A pre-configured ethernet switch designed for professional AV solutions, perfect for touring and live events.

Tailored for AV industry
Pre-configured settings that are common in the AV industry, such as QoS and IGMP snooping.

Easy set-up
Easy group function with pre-configured VLAN's for a quick set-up (without IT knowledge).

Touring approved
Metal housing and ruggedized Ethercon connectors, ideal for touring and live events.

Converged networking
Transfer multiple protocols (Dante™, RAVENNA/AES67®, ArtNet, MANet 1&2, sACN,Q-LAN ...)

Ultimate link redundancy
RlinkX redundancy protocol automatically takes over signal in milliseconds in case of a link failure.

Focus on being creative again.
Stop wasting time on programming your network or spending money on IT consultants to do it for you. With Luminex GigaCore switches and only some basic AV knowledge, you can do it all by yourself in just the blink of an eye. Now you can finally focus on your core business as an AV technician or designer: "being creative"!

Optional: Redundant Power Supply Unit (RPSU)
Connect the GigaCore 14R to a GigaCore RPSU for ultimate redundancy, even on power level (and PoE). If for some reason the built-in power supply fails, the RPSU keeps your system up and running.

When distance matters: Fiber to the rescue.
The GigaCore 14R provides users with two SFP cages for Fiber connectivity. Just connect a multimode or single mode Fiber transceiver to each cage and it will enable you to cover greater distances with a total link immunity up to 10km!

Specifications

The GigaCore 14R is a Gigabit Ethernet switch designed to cope with the most demanding lighting and AV installations. Managed through a web interface, the device offers a user friendly experience with an industry specific oriented interface. Fitted with two SFP cages, the switch can support any compliant fiber transceiver, breaking the limit of copper cable run. Two power backup ports at the rear of the unit makes the switch a reliable Gigabit core for your network. The GigaCore 14R comes with a bunch of industry oriented feature, providing a user friendly solution and lowering down setup time.

Key Features: 

• Most suitable applications: Touring and live events
• RLinkX (Link redundancy): Yes
• Groups (VLAN segmentation): Yes
• MultiLinkX (Link aggregation): Yes
• Profile manager: Yes
• Memory: 4Mb
• MAC address table:
• Address learning / Aging: Self learning, Auto aging
• Switching throughput: 32Gbps
• IGMP support: Yes (V1/V2/V3)
• IGMP snooping: Yes, enabled by default
• Port sensing: Auto negotiation
• Auto crossover: MDI / MDIX
• Auto sensing: Full or Half Duplex (Gigabit is Full Duplex)

Connectivity:

• Ethernet connectivity: 12 x Shielded Neutrik Ethercon connectors
• Fiber connectivity: 2 x SFP cages
• Ethernet port speed: 1Gbps
• Serial: 1 x serial RJ45 console port

Power:

• Power connectivity:
• 1 x IEC inlet with fuse holder
• 1 x redundant power input on Molex Micro-Fit 6 pin connector
• 1 x redundant PoE input on Molex Micro-Fit 6 pin connector
• Power input: 100-240VAC, 50-60Hz
• Power consumption: Maximum 30W (maximum 180W with PoE Supply Unit)
• Fuse: 3.15A 250V Slow Blow
• Backup power input: 15VDC / 2A
• Backup PoE power input: 48VDC / 3.4A
•  

Protocols:

• Supported protocols: Dante©, RAVENNA/AES67©, Ethersound©, Q-LAN, REAC©, sACN, ArtNet, MANet2, HogNet, RTTrPL (BlackTraX), IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), PoE+ (optional), IEEE 1588 PTP V2
• Sound protocol compliance: Yes (low jitter)
• Ethernet compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet

Configuration: 

• Display and jog: None
• Configuration: Through the built-in web server
• Status LEDs:
• Global status LEDs: Device, power, PoE power, RLinkX
• Port status LEDs: PoE, RLinkX, link/activity and port speed
• Colored RGB LEDs: No

Physical:

• Mounting: Rack
• Enclosure: Robust metal housing
• Dimensions (W x D x H): 482 x 204,3 x 44 mm (19″ x 8.04″ x 1.73″)
• Weight: 2,9 kg
• Packaging: 545 x 335 x 80 mm (21,5" x 13,2" x 3,15")
• Environment:
• Operating temperature: 0 to +50 °C
• Storage temperature: -10 to +70 °C
• Humidity (non condensing): 5 to 95% RH
• Certificates/Approvals: CE
• Standards: EN 60950-1, EN 55022, EN 55024