Martin - VC-Strip 16x1 Martin - VC-Strip 16x1 Martin - VC-Strip 16x1 Martin - VC-Strip 16x1 Martin - VC-Strip 16x1 Martin - VC-Strip 16x1
Martin - VC-Strip 16x1
Martin - Ext PixLine 20 RGB 1270mm Square Dif Front Alu

Martin - Ext PixLine 20 RGB 1270mm Square Dif Front Alu

Martin - VC-Strip 8x1

Martin - VC-Strip 8x1

Martin - VC-Strip 16x1

€103.67 Excl. Tax
Art. code

Martin - VC-Strip 16x1

The VC-Strip family of narrow LED video strips is ideal for integration of video into stage and set designs, interiors, custom set elements and more. VC-Strips are fully pixel-level calibrated on brightness and colors for optimal uniformity and quality and are driven by Martin’s award-winning P3 System Controller family for smooth playback that outperforms any DMX-based system. VC-Strips are available in various lengths and can even be cut to required length on-site.

  • Wide range of pixel pitches to suit every application
  • Easy cabling, mapping and configuration
  • Bright and fully calibrated for optimal consistency

Key features:

  • 16/8 individually controllable pixels
  • 4000 nits of brightness
  • High-quality, 16-bit per color image processing technology
  • Pixel-level brightness and color calibration for optimal image quality
  • P3/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller
  • Combined power/data input (single cable for power and data input)
  • Combined power/data thru (to daisy-chain up to 45 VC-Strips)
  • Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
  • Length of VC-Strip can be custodemized on-site (simple cutting) to fit integration needs
  • Compatible with VC-Grid

To be ordered in multiples of 6


  • VC-Strip 16x1 25™:Length: 400 mm (15.8 in.) *
  • Width: 20 mm (0.8 in.)
    Height: 18 mm (0.7 in.)
    Weight: 43 g (0.1 lbs.)

*Including 1 mm board-to-board gap

Control and programming:

  • Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ and/or DMX
  • Control modes: Pixel and module
  • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
  • Protocol detection: Automatic
  • Setting and addressing: P3 System Controller or RDM-compliant controller
  • DMX channels: Pixel mode 16x1 model = 48, 8x1 model = 24; Module mode (all models) = 3
  • Color and intensity calibration: Pixel-level
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20
  • Firmware update: Via P3 System Controller

Control/User Interface:

  • Device status: Multi-color visual indication
  • Device test and reset: Pushbutton to call up local test patterns and reset device


  • Minimum LED lifetime: 50,000 hours (to >70% luminous output)**Figure obtained under manufacturer´s test condition

Photometric Data:

  • Pixels: 16/8 per moduleLuminous intensity, calibrated mode: 4000 NitViewing angle: 120° x 120°

P3 Video processing:

  • Color Resolution: 16 bits per color (48 bit per pixel)
  • Color Temperature Control: 2000K-11000K
  • Synchronization: System-wide
  • Frame Rate: Up to 75 frames/sec
  • Brightness Control: 0-100% (at full color resolution)
  • Gamma Correction: Fully controllable
  • Gamma Control: Fully controllable
  • Color Gamut Control: Fully controllable
  • LED aging correction: Built-in


  • Base: Black FR4 circuit board
  • Protection rating: IP20
  • RoHS compliant


  • Mounting: Mounting holes in module
  • Orientation: Any
  • Maximum number of VC-Strip™ 16x1 25 modules per daisy-chain: 45
  • Maximum number of VC-Strip™ 8x1 25 modules per daisy-chain: 63


  • Power & data input: 4-pin Molex connector
  • Power & data thru: 4-pin Molex connector


  • Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU
  • Peak power consumption (at full intensity, full white): 16x1 model 8 W; 8x1 model 4 W
  • Typical power consumption (with typical video content): 16x1 model 3 W; 8x1 model 1.5 W

Figures for typical video content are indicative only and will vary. Power consumption figures include cable and assume a 50 m chain


  • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 45° C
  • Minimum ambient temperature (Ta min.): -20° C
  • Peak heat dissipation (calculated, at full intensity, full white): 16x1 model 28 BTU/hr.; 8x1 model 14 BTU/hr.
  • Typical heat dissipation (calculated, with typical video content): 16x1 model 11 BTU/hr.; 8x1 model 5.5 BTU/hr.

Figures for typical video content are indicative only and will vary.


  • EU safety: EN 60950
  • EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
  • US safety: ANSI/UL 60950-1
  • Canadian safety: CSA C22.2 No. 60950-1
More Information
Condition New
Brand Martin Professional