Shure - AD4DE=-A (470-636 MHz)

Shure - AD4DE=-A (470-636 MHz)

EU power supply included

Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio.

The AD4D Two-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control and signal routing options bring a new level of management and flexibility to your entire workflow.

Features

• Wide tuning range up to 184 MHz
• True digital diversity reception per channel for drop-out resistance
• Networked control with Wireless Workbench® software and ShurePlus™ Channels iOS app
• Front panel headphone jack enables Dante™ Cue and Dante™ Browse monitoring
• Configurable Ethernet switch for redundant Dante digital output
• AES3 output
• Channel Quality meter displays RF signal-to-noise
• Locking AC connectors
• Optional DC module available to support redundant power

• Dimensions: 44 mm × 483 mm × 333 mm (1.7 in. × 19.0 in. × 13.1 in.), H × W × D
• Weight: 4.6 kg (10.1 lbs), without antennas
• Housing: Steel; Extruded aluminum
• Power Requirements: 100 to 240 V AC, 50–60 Hz; 0.26 A max.
• Thermal Dissipation: Maximum: 23 W (78 BTU/hr) Idle: 15 W (52 BTU/hr)

Audio output

• Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
• Configuration: 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
• Impedance: Typical, XLR Line out 100Ω
• Full Scale Output: 200 kΩ load 1/4" (6.35 mm): +8 dBV XLR: LINE setting= +18 dBV, MIC setting= –12 dBV Mic/Line Switch 30 dB pad
• Phantom Power Protection: Yes
  

Networking

• Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
• Network Addressing Capability: DHCP or Manual IP address
• Maximum Ethernet Cable Length: 100 m (328 ft)
  

Cascade Output

• Connector Type: BNC
• Note: For connection of one additional receiver in the same band
• Configuration Unbalanced, passive
• Impedance: 50 Ω
• Insertion Loss: 0 dB, typical

RF Input

• Spurious Rejection: >80 dB, typical
• Connector Type: BNC
• Impedance: 50 Ω
• Bias Voltage: 12–13.5 V DC, 150 mA maximum, per antenna, switchable on/off
• RF Carrier Frequency Range Model-dependent
  AD4D=A: 470–636 MHz AD4D=B: 606–810 MHz AD4D=C: 750–960 MHz